Datasets in the Global Wind Atlas

The data used in the Global Wind Atlas was chosen from the best availible global datasets for each required category. This meant the datasets need to both be of high quality, but also high enough resolution that the downscaling process would not be missing large amounts of information.

Atmospheric Reanalysis Datasets

Reanalysis data has been used in the wind energy sector, particularly wind resource assessment, for some years. The increasing resolution of these datasets has made the Global Wind Atlas methodology a possibility. Here details of the reanalysis data used in the Global Wind Atlas are given and the ways we reformat the reanalysis data for the purposes of Atlas are described.

 Reanalysis data description

A reanalysis is a scientific method for developing a comprehensive record of how weather and climate are changing over time. In a reanalysis observations around the globe and a numerical weather prediction model, which simulates one or more aspects of Earth system, are combined objectively to generate a synthesized estimate of the state of the system. In the 2010s four large atmospheric reanalysis projects took place. These are listed in Table 2.1↓. All provide output at a horizontal resolution below 1° × 1°. Three of these reanalysis (i.e., CFDDA, CFSR and MERRA) were generalized and later used in the global wind atlas.

Many of the models described in Table 1↓ were run at a high spatial resolution but the data was truncated (e.g. CFSR, ERA-Interim) or interpolated (e.g. CFDDA) to a lower resolution when made available to the users. This means that the data is not available in the native model grid (e.g. there is no information on the real surface elevation and land use) and has implication for the generalization procedure carried out. See the Generalization section for more information about how the reanalysis datasets were generalized.

Table 1

Description and grid characteristics of the various modern reanalysis used to generate the Global Wind Atlas. TXXX represents the spectral truncation of the model and LXX the number of vertical levels.

Global reanalysis model type and reference native resolution available resolution
Climate Forecasting System Reanalysis (CFSR) USA NOAA spectral model [22] T382 L64 0.5° × 0.5° 6 hours
Climate Four Dimensional Data Assimilation (CFDDA) NCAR grid point model (MM5) [12, 21] Twin polar grids, 40 km, 28 levels 0.4° × 0.4° 6 hourly
Modern Era-Retrospective Analysis for Research and Applications (MERRA) NASA GEOS-5 data assimilation system; grid point model [20] 1 ⁄ 2° × 2 ⁄ 3° 72 levels 1 ⁄ 2° × 2 ⁄ 3° 6 hours
European Center for Medium Range Weather Forecast (ECMWF) Reanalysis (ERA-Interim) ECMWF IFS Cy31r2; spectral model [8] T255 L60 0.71° × 0.71° 6 hours

 Analysis and formatting

 Climalogical statistics

The reanalysis datasets come in varying meteorological data formats. Therefore it is important to harmonize the file formating for later processing of the reanalysis datasets. For the Global Wind Atlas it is the climatological properties of the datasets that are of primary interest, rather than the datasets as a time series. Therefore the reanalysis data is compiled into a tabular form. The table content is similar to the WAsP observed wind climate file format and contains the following information. This table data stored in a single large netcdf file for each reanalysis dateset.

This file is called the reanalysis TAB netcdf file and contains the statistical information required for further downscaling.

Figures 1↓, 2↓, 3↓, 4↓ show the mean wind speed at 100 m above the surface for the MERRA, CFDDA, CFSR and ERA-Interim reanalyses. The general patterns of the winds are similar. Over the oceans the strong westerly in the mid-latitudes, and the trade wind belts in the subtropics are shown. However there are differences in exact placement of these features and magnitudes. For example winds over land masses appear to be lower for the ERA-Interim and CFSR reanalyses, and higher for CFDDA reanalysis. Part of the explanation for this is the difference in boundary layer parameterization schemes and surface descriptions in the reanalysis models. This is discussed in more detail the Generalization section of the methods.

figure WP1_figs/RA_TAB_MERRA_100m_ws.png figure WP1_figs/legend_clip.png
Figure 1 
Mean wind speed at 100m from MERRA reanalysis. Period 1979-2013.
figure WP1_figs/RA_TAB_CFDDA_100m_ws.png figure WP1_figs/legend_clip.png
Figure 2 
Mean wind speed at 100m from CFDDA reanalysis. Period 1985-2005.
figure WP1_figs/RA_TAB_CFSR_100m_ws.png figure WP1_figs/legend_clip.png
Figure 3 
Mean wind speed at 100m from CFSR reanalysis. Period 1979-2010.
figure WP1_figs/RA_TAB_ERAINT_100m_ws.png figure WP1_figs/legend_clip.png
Figure 4 
Mean wind speed at 100m from ERA-Interim reanalysis. Period 1979-2012.

 Daily and annual cycles

Although climatological properties are the primary interest, the Global Wind Atlas also serves information about how a location’s large scale forcing varies on average throughout the day, and throughout the year. This is useful information in order to approximately gauge how wind resources are distributed temporally. For this purpose the reanalysis data is averaged according to month of year and hour of day. A tabular form is used with the following content:

This file is called the reanalysis CYCLE netcdf file. An example of the average daily and annual cycle from the CFDDA reanalysis is shown in Fig. 5↓. The wind speed values are normalized by dividing by the annual mean wind speed. This is done to make sure that the wind speed value is not misunderstood as an expected wind speed for the location. It can be seen for this location there is a strong daily cycle, with maximum wind speeds at around 12 UTC. There is also a moderate annual cycle, with maximum winds around July.

figure WP1_figs/DAcycle_CFDDA_LV.png
Figure 5 
Average daily and annual wind speed cycle, and wind direction frequency rose at 50 m from CFDDA reanalysis for a location around Northeastern Lake Victoria (0.4°S, 34.0°E). The shading on the cycle plots shows the standard deviation of monthly and hourly means. Period 1985-2005.

 Summary

The reanalysis datasets have been described. The way they are formatted into netcdf files containing the required information for the Global Wind Atlas downscaling and annual and daily cycle charactistics has been outlined. How the reanalysis TAB file is used is described in the methodology section. Information about the different map tools that can use the reanalysis data can be found in the tutorials.

Contributing authors Jake Badger, Andrea N. Hahmann, Bjarke T. Olsen


Topography

Public datasets describing the earth’s topography have become available at increased resolution in recent years. These impressive datasets make the Global Wind Atlas feasible. For the purpose of the Global Wind Atlas, the topography description can be split into two parts:

Orogoraphy

The Global Wind Atlas used digital elevation models from Viewfinder Paroramas. This data was developed in support of their downloadable software that draws panoramas from viewpoints. The data has a 3 arc-second resolution and is mainly based on data collected by the Shuttle Radar Topography Mission (SRTM). SRTM data has been availible for use in WAsP through the WAsP map editor, however, it does not have any coverage north of 60°. This would have prevented the modeling of large parts of Scandinavia, Russia and Canada. Additionally it is known that the raw SRTM data has no-data (void) areas in mountainous and desert areas and has some other errors. These have been corrected in other datasets, but the 60° N restriction still applies in those datasets. The viewfinder DEM has voidfilled those areas using the best availible alternative sources, which depended greatly on the region being voidfilled. Detailed information about the datasets used for voidfilling can be found at http://www.viewfinderpanoramas.org/dem3.html

The viewfinder DEM was provided in the WGS 1984 coordinate system (EPSG: 4326), as a global raster that was chopped into 1° by 1° tiles. Therefore the data had to be reprojected to UTM rasters to match the global wind atlas tile format. This interpolation was done using the Geospatial Data Abstraction Library (GDAL). In addition to reprojecting the data, the data was warped to a 150m resolution, which cooresponds to the effective resolution of the SRTM data. This conversion used the nearest neighbor resampling algorithm from the gdalwarp tool.

Land use to roughness length

Roughness length in the global wind atlas was derived from the GlobCover 2009 land cover map. The GlobCover dataset was created by ESA and the Université catholique de Louvain (UCL) to convert MERIS FR (Medium Resolution Imaging Spectrometer Instrument Fine Resolution) surface reflectance mosaics into 22 land cover classes as defined by the United Nations Land Cover Classifcation System (LCCS). The GlobCover dataset was selected as it is a relatively recent land-cover map, with a consistent approach applied to all parts of the globe. It has a 10 arc-second ( 300 m) resolution and was provided in the WGS 1984 coordinate system (EPSG: 4326). The data was converted to the GWA tiles using gdalwarp as described in the Orography section, but the spatial resolution of 300m was retained.

While GlobCover is a full global raster, one of the classification types is no-data. This datatype was mostly in areas North of 60°. To voidfill these regions we used the 0.5 km MODIS-based Global Land Cover Climatology. This dataset was based on 10 years of data 2001-2010, and had 17 land cover classes. These classes were mapped to the GlobCover classes and then used to fill any no-data points.

Once the data was reprojected and the no-data points were filled, the data was converted to roughness length by defining a specific height to each of the land use classes. A reproduction of this mapping is provided below. The mapping was created based on the class name as well as looking at a global map of the classes and using expert input from DTU Wind Energy modelers.

Table 3.1 

Land use classes and assigned surface roughness lengths.

Class Name GlobCover Number Modis Number Roughness Length
Water Bodies 210 0 0.0
Permanant Snow and ice 220 15 0.0004
Bare areas 200 16 0.005
Grassland, savannas or lichens/mosses 140 10 0.03
Sparse vegetation 150 None 0.05
Croplands 11, 14 12 0.1
Shrubland 130 6, 7 0.1
Wetlands 180 11 0.2
Mosaic natural vegetation / cropland 20, 30 14 0.3
Flooded forest 160 None 0.5
Mosaic grassland / forest 120 9 0.5
Flooded forest or shrubland 170 None 0.6
Urban Areas 190 13 1.0
Forests 40, 50, 60, 70, 90, 100, 110 1, 2, 3, 4, 5, 8 1.5

Discussion on limitations

Use of these global datasets for orography and land use will not give as accurate a description of topography as dedicated land surveys, such as those from large scale mapping from national cartography institutions. Although 150 m and 300 m resolution for orography and roughness length gives an impression of high resolution when related to global coverage, an actual wind turbine site will not be well represented at this resolution. Therefore the Global Wind Atlas is not appropriate for specific site assessment.

Another limitation is due to the conversion of land use or class to a single surface roughness length. This discretization of land use type is somewhat unrealistic. Furthermore, that a single land use can be assigned a single surface roughness is unlikely to be correct because a single land use may actually represent a range of vegitation covers.

For these reasons we expect uncertainty to be introduced to the wind climate calculations. However, this uncertainty needs to be balanced against the uncertainty that is inherent in not considering the high resolution topography at all. Therefore we advise that the appropriate use of the Global Wind Atlas is for initial aggregated area studies and not for site specific assessments.

 Summary

The relevance of the surface description has been outlined, and broken into orography and land use or class. The sources of the topography data have been described. The limitations of the topography data and method have been discussed. The topography will be used for the calculation of local wind climates. The topography data is also shown in the Atlas.

Contributing authors Neil Davis, Jake Badger


Results datasets

The principle of the Global Wind Atlas is to make available the data relevant to the calculation of the wind climatologies. This is ensure transparancy of methodology. For example, the user can see what has been used for surface roughness length in their region of interest. The user can also see the flow modelling effects and the terrain ruggedness. This allows the user to see inside the methodology and assess the model behaviour. It also allows the user to assess the quality of the input data, which has direct influence on the quality of the output data.

Flow modelling data

These datasets tell the user about the flow modelling characteristics. Details of the flow modelling can be found 5↑. Using these data, the user can gain an understanding of the microscale phenomena that are important in their region of interest. For example, one can see if roughness change effects have an impact, or whether there is a significant orographic speed up effect. Here also the ruggedness index (RIX) is given. This is useful for users to assess uncertainty in the modelling output.

Roughness effects

Orography effects

Modelling set-up information

Full calculation output data

These data are direct values from the microscale local wind climatology caculation. Due to the size of the dataset, only a subsample set of data are served on the website. Those interested in applying the full calculation data should contact DTU Wind Energy.

High-resolution wind speed and power density

Aggregated data

In order to give the user quick access to the richness of the Global Wind Atlas results, an aggregation method has been devised. With the dataset listed below the user can see the characteristics of the windiest sites inside a 1 x 1 km area, and can see how much variation of resource there is within that area.

High-resolution wind speed

High-resolution power density

As in the aggregated mean wind speed datasets described above, the analogous datasets are provided for the power density.
Contributing authors Neil Davis, Jake Badger